Unlimited Free Fixes for Dewalt Panasonic Firestorm Makita, Etc.
New Life for NiCad Batteries that Won't Charge or Hold a Charge!
Black & Decker Cordless Power Tool Batteries 12 14.4v 15.6 18v 24 volt
   Read Buyer's Testimonials...click    Beware of Scammers! Look for the Trademark
Do Not Buy Until You Read...
You are buying a "how to" guide Ebook!
No hardware is included
A volt meter is Needed


After 1 day, this fully charged battery has lost its charge already. It should be at least 14.4 volts.

dewalt craftsman ryobi etc batteries before resurrection

This Useless battery will be Resurrected!
New Life Once Again!

After Resurrection and some usage, it is still showing more than 14.4 volts. It was resurrected and charged over a week ago! (Time Resurrection lasts depends upon the initial condition of the battery) 

15 Volts After Battery Resurrection

Unique Dynamics, Inc. has designed a way to Resurrect your NiCad batteries!

  • After Resurrection, your rechargeable battery will hold a full charge**.
  • After Resurrection, your battery will reach its full power & run time potential.**
  • One Resurrection Guide for all brands - Every NiCad Battery is Included!
  • The "Battery Resurrection Guide™PRO Version" has a simple one step process called "Easy Resurrection™" that works for most batteries without disassembly.
  • For badly abused batteries you'll find the 3 step Resurrection process an easy way to bring them back to life!** NEW! DustBuster Battery Repair!
  • Learn it once & you can repeat it over & over on as many batteries as you want.
    ** all NiCad batteries gradually lose their charge - about a 98% success rate

Fix All NiCads - Power Tool, Phone, Laptop, Single Cells, Shaver, Remote Car


I bought a series of Black & Decker tools. (2) drills, a reciprocating saw, circular saw, and light that all used the same 14.4 volt battery. I also bought extra batteries and have a total of 4.

Three of the Batteries Stopped Holding a Charge

You can probably relate to this... I charge the battery today and tomorrow my drill runs slow and then it runs out of power after one minute. If I charge the battery and then use it right away, it will work, but it has much less power and its run time is very short compared to a new battery.

The only choice I had was to pay $35 + tax for a new battery! Thumbs Down for new battery
Thumbs up for Battery Resurrection Guide But - Now There Is Another Choice!Battery Resurrection, Renewal, Restoration guide
Unique Dynamics, Inc. is in the business of creating new products, so here was an opportunity to create a method to Resurrect rechargeable batteries, so they would again take a charge and hold the charge as well as deliver real power.
We Devised a Method That Works and Really Works Great!

After Resurrecting my batteries, the charge was still there day after day. I tested the batteries trying to hold the chuck with my hand, but it was too strong to hold!
This really works, and works great!

Read Hundreds Of Testimonials! from people from all walks of life including, carpenters, electricians, drywallers, painters, cabinet makers, roofers, retirees, plumbers, handymen, automotive repair, general construction, business owners, women in construction, tinkerers, weekend warriors, and others that own a cordless power tool.

One Guide for all voltages and brands of NiCad Batteries including, Dewalt, Makita, Ryobi, Black and Decker Firestorm & Versapak, Porter Cable, Bosch, Fein, Hitachi, Skil, Milwaukee, Craftsman, Coleman, Delta, Ingersoll Rand, Lincoln, Metabo, Panasonic, Harbor Freight, Paslode, Ridgid, Sears, Snap-on, Senco, Worx, Kawasaki, Panasonic, etc.

What are your old batteries worth? Your non-working tools?

Considering the price of a new power tool battery at $30-$75, if you have 3 sick 14.4 batteries like I did, the cost to replace them would be $120.00!

Think about what it would cost to replace, not just your old power tool batteries, but other rechargeable Ni-Cad batteries in other applications. Most of these batteries can be Resurrected and used again. Just think about how much money you will save! Also, Resurrection in many cases is faster than the time it takes to checkout new batteries.

98% of NiCad cordless power tool batteries can be Resurrected Including:
Black and Decker, Dewalt, Ryobi, Panasonic, Makita, Porter Cable, Bosch, and Craftsman 12 volt, 14.4 volt, 15.6 volt, 16.8 volt, 18 volt, & 24 volt cordless drills, saws, and other NiCad batteries.

Maybe you have appliances with built in batteries that don't work, like the screwdriver below. Most of these can be Resurrected!

What's it worth to have your old batteries working again at their full potential? You're probably saying to yourself, "This is a no brainer if it really works, but..." - Keep reading...

There is only 1 question left that could prevent you from ordering the "Battery Resurrection Guide™PRO Version"" right now...
Is this for real? Does it really work? Yes! Yes! Yes! It works great! I have a Black & Decker mini hedge trimmer that uses 2 Versapak cells. I would take the batteries out of the charger and put them in the trimmer. The power was pathetically weak and it would run for about 2 minutes tops. I resurrected each battery in less than a minute and then, after charging, I put the batteries in the trimmer and spent over 30 minutes continuously trimming in my yard. It was running like I put in 2 new fully charged batteries! Days later I checked the versapak voltages and they were still at nominal! I don't usually say, "Trust Me", but you don't need to trust me.
Read Our Testimonials!

Black and Decker Hedge Trimmer using Versapak Batteries

I've had this trimmer about 3 or 4 years and was getting ready to toss it until I discovered how to resurrect the batteries. Now it runs like new!

A Versapak Battery

I hope you haven't thrown away your VersaPak batteries!
Ni-Cad batteries like these are simple to resurrect in a few seconds!

What Is the "Battery Resurrection Guide™PRO Version"

The "Battery Resurrection Guide™PRO Version" is an online, password secured, step by step guide that will enable anyone who can use a few common tools to resurrect rechargeable Ni-Cad batteries to their full potential (so they will hold a charge). For the 3 step method you will need access to individual cells within the battery, therefore some disassembly is required for many power tool batteries. Sealed batteries like the VersaPak do not require any disassembly and are Resurrected in seconds. Also, there is an "Easy Resurrection™" one step process you can try first!

This auction does not include any hardware or tools. A volt meter is required -
You can price one by clicking here
This auction is for online access to the

"Battery Resurrection Guide™pro version"
that is available only from Unique Dynamics, Inc.
Shipping and Handling: NONE!
You will be sent an email automatically with the link, user, and password to the
"Battery Resurrection Guide™pro version" after your payment is completed and received. A backup email will be sent manually within about 4 hours.
If you have questions, contact me at info@uniquedynamics.com or call 619-825-0519 and leave a message.
Another Case of a Battery Resurrection

Panasonic "D" Cell nicad Battery
In 1988 I bought a bunch of these panasonic Ni-Cad rechargeable D cell batteries

Over the years I've thrown out about 6 of these because they wouldn't charge any longer. Even after charging for a whole day they were simply dead and would not work in the slightest. I tossed many of these "dead" batteries in the trash. Now that I've developed a method to Resurrect batteries, I dug these out of retirement and put them in the charger. After charging I tested each one with a volt meter.

Two of these 8 batteries tested "0" Zero volts and are in the picture above. Zero volts means you can't even get the tiniest glow from a flashlight. I Resurrected these two batteries and placed them in the charger overnight. Then, I tested them about 4 hours after being removed from the charger and they tested 1.24 volts - still above the nominal 1.2 voltage.

Bright Flashlight running on 2 Resurrected "D" Cells

The picture above shows the same "dead" batteries after Resurrection in a 2 cell halogen flashlight. Notice how bright the light is. I kept waiting for the light to dwindle out, but I got tired of waiting and shut it off. Before battery Resurrection, I couldn't even get a little glow after a full length charge.

Not bad for 15 year old Ni-Cad batteries that were dead and ready for the trash. It was so easy to bring these batteries back to life and it will be easy for you too, when you learn how!

Resurrection of a Screwdriver

Ryobi Cordless Screwdriver with internal nicd batteries

I received this screwdriver as a gift. It worked great for about 6 months and then it wouldn't hold a charge any longer. It has been laying around unused for years.

I Resurrected this unit in about 10 minutes. I charged it and left it out of the charger overnight and it runs great. You'll learn how to Repair your tools and batteries too!

Vtech nicad battery telephone

I love this 2 line phone. It worked great for 7 years and then it went nuts! Really, the channels were rotating, it was making strange sounds, and would not charge in the base. I tried resetting the base but, nothing would make it work correctly. I looked for a new battery but, there were none to be had because Vtech discontinued making them. I did the easy resurrection™ that took about a minute and put it in the base to charge. It has been working perfectly for over a year now.

This is real - Read Our Testimonials

Black and Decker DustBuster dust buster - spill buster with internal Nicad batteries

There are many different models of DustBusters. Some use versapak batteries, but most have built in battery packs. Just added to this PRO version of the Battery Resurrection® Guide™ is a step by step section that shows you how to rebuild the battery pack and make it run like new again!

Order now with Credit Cards...

To Order:

(backup email with access sent within 6 hours)
To pay with a money order, personal check, Cash, or cashiers check make check to:
Unique Dynamics, Inc. 6125 Caminito Sacate, San Diego, CA 92120
***Be Sure to Include your Email Address for Delivery***

Our "Battery Resurrection Guide™" is also sold under the following trademarks:
"Battery Resurrection PRO version™", "Battery Repair"
"Battery Repair Guide"


Links Resources

Dewalt, Black and Decker, Porter Cable, Versapak, and Firestorm are trademarks of the Black and Decker Corporation
Craftsman is a trademark of Sears Inc.
Makita is a trademark of Makita Tool Corporation
Milwaukee is a trademark of Milwaukee Tool Corporation
Bosch is a trademark of Bosch Inc.
Panasonic is a trademark of Matsushita Corp.
Ryobi is a trademark of Ryobi Tool Corporation

Learn About Sub-C Cells and Batteries with Tabs for Building Battery Packs